Routing Problems

Conundrum 01

This network is running RIP version 2. Unfortunately the network engineer has made some mistakes when setting it up and there is no connectivity.

Can you repair this?

Begin by downloading the Packet Tracer file. Run the file in Packet Tracer 5.x and open each router to examine its running configuration.

You should start by drawing the network on A3 paper using the configurations and information from Packet Tracer.

Note that the switches have not been configured and will not be a part of the networking problem.

Make a note of the corrections that you have made to get the network running again.

Packet Tracer file for repair

Solution

Swindon
192.168.100.1 removed from rip
Serial 0/1 no clock rate

Essex
S0/0/1 incorrect subnet mask
Incorrect routing network statement

London
fa0/0 wrong ip address
Serial 0/0 port turned off

Bert
Incorrect IP address and subnet mask
Wrong cable connecting to switch

Gilgamesh
Wrong default gateway
Wrong subnet mask

Atahualpa
Wrong subnet mask
Connected to wrong FastEthernet port


solution file