Routing Redistribution Lab

Download the PT5 file.



Part 1

Use the address blocks indicated for the LANs and configure the serial links from the 10.0.0.0 /8 address block.

Configure the three routing protocols as shown on the diagram.

Check the routing tables when you are finished.

Which routing protocols automatically redistribute their data to other routing protocols?

Gather data to show this and draw a table of the default settings.

Part 2

Now you have done this, adjust the border routers so that all routing information is redistributed.

You may need to make use of the Ciscopedia to find the commands to implement this.

Once you have made the changes, gather data to prove that all routing protocols are sharing their data.

Part 3

Ensure that the LANs are not receiving routing information. How might this be achieved?

If there are any problems, make brief notes stating the problem. you will need to become skilled in making notes of this type when working on a 'broken' system as these notes will become useful in diagnosis and repair.